Verifying network connection – Airlink101 APSUSB2 User Manual
Page 9
Advertising
8
5. Verifying Network Connection
Step 1
Run the PS Utility by going to Start, (All) Programs, PS Utility, PS Utility v2.00.
Step 2
Make sure the Print Server is detected under the Device Name.
Step 3
Click on Show Web Setup to display the Print Server’s Web Configuration
Utility.
Step 4
Click on the Management link and select Printer Status. Make sure the Printer
Status for each of the connected ports displays On line.
Step 5
Click on the Tools link and select the port that a printer is connected to and click
the Test button. The Print Server will perform a low-level print test, bypassing the
Advertising