Airlink101 APSUSB2 - Manual (Page 8)

7
Step 6 In the IP Address field, enter a valid IP address, subnet mask, and default
gateway that matches your local area network.
For example: If your computer’s IP Address is
192.168.1 .100, enter the same three
numbers: 192.168.1 in the corresponding fields.
Note: You can leave the last IP Address number 254 as is unless another network
device (i.e. the Default Gateway) is already using that number. If another network
device is already using 254, then change it to another number that is currently not in
use (preferably 200 - 253).
For the Subnet Mask and Default Gateway fields, enter the same number as the
TCP/IP setting of your computer.
Step 7 Click OK.
Step 8 Close the PS Utility program.