Avaya 4630 - Manual (Page 32)

Introduction Using Your 4630/4630SW IP Telephone
2-2 Issue 2.0 December 2003
Making Calls
2
You have several ways of making calls, as described in this section.
NOTE:
You can set an option for what displays on an outgoing call. See Phone
Application Options in Chapter 8 for details.
Manual Dialing 2
Dial a call manually by picking up the handset, activating the headset, or pressing
the Speakerphone (
) button. Then, depending on your preference, use
either procedure below to initiate dialing.
Direct (Manual) Dialing 2
1. Pick up the handset, activate the headset, or press the Speakerphone
( ) button.
The first available call appearance highlights, displays the Off-Hook
(
) icon, and starts the Call Timer.
2. Use the dialpad to enter the number you want to call.
The number entered displays on the active call appearance line, and the
4630 IP Telephone initiates the call.
3. Hang up the handset, deactivate the headset, or press the Speakerphone
( ) button to end the call.
Edit Dialing 2
If you have set up your Edit Dial option (as covered in 4630/4630SW IP
Telephone Options ) to display on the Phone screen, you can correct a number as
you enter it, before actual dialing and call connection occur. Use the
Speakerphone for ease of dialing.
NOTE:
When using Edit Dial, dialing is not initiated until you select the Send button.
1. Using the dialpad, enter the number you want to call. You don’t need to
select the Edit Dial box, you can just begin “typing” the numbers. To correct
an entry, select the Backspace (
) button and retype the digit in error.
The digits entered display on the dial line as you type.
2. When the number is complete, select Send.
A call appearance line highlights, displays the Off-Hook ( ) icon, and
starts the Call Timer. The number entered displays on the active call
appearance line and the 4630 IP Telephone initiates the call.