Perma Pure GASS-2040 User Manual
Page 27
Advertising
27
GASS-2040 User Manual | Original Instructions
System
mounting flange
Stack nozzle
flange
Lifting plate
Customer
supplied supports
Included Unistrut
mounting angles
Figure 23
APPENDIX D
1. Stack Mount Systems
The GASS-2040 stack mount system is intended to be mounted on a 2" to 4" flanged nozzle
has been welded directly to the stack. It will accommodate a nozzle flange angle of 0 to 10
degrees. Mounting of the system is relatively simple but will require a three person team as the
system weighs approximately 110 pounds and will need to be supported temporarily during
installation (See Figure 23).
Advertising