Perma Pure SDS-Series 4C-D201_-D202 - Manual (Page 6)

PERMA PURE LLC
SDS™-Series User’s Manual
Doc. #219: Revision: 000
Page 6 of 12
Installation
Tools and hardware recommended for installation:
• (2)
5/8
” wrench
• (1) ¾” wrench
• Teflon tape or pipe thread sealant
• (4) ¼” dia. mounting screws, not included
• Appropriate adaptor to connect to ¼” FNPT air line
Location of SDS system
Figure 1 – Pressurized Sample Configuration
Figure 2 – Sample Vacuum Configuration
Pressure limitations are to prevent condensation in the SDS system;
Vacuum limitations are to prevent the collapse of the membrane tubes
COOLER
PUMP SDS
COOLER
PUMP SDS
P≤20
psig
P≥-5
psig