Perma Pure SDS-Series 4C-D201_-D202 - Manual (Page 9)

9
COPYRIGHT 2008, ALL RIGHTS RESERVED, Original Instructions
PERMA PURE LLC
SDS™-Series User’s Manual
Doc. #219: Revision: 000
Page 9 of 12
Dual stream application (Refer to figure 5)
1. Remove the crossover tube.
2. Connect the sample stream 1 supply line to the ¼” tube compression fitting labeled
“Sample gas inlet”.
3. Connect the sample stream 1 outlet line to the 1/4” tube compression fitting B.
4. Connect the sample stream 2 supply line to fitting A.
5. Connect the sample stream 2 outlet line to fitting labeled “Sample gas outlet”.
Figure 5– SDS-D202 Sample Connections
Instrument air connections – all models
1. Connect an instrument air line to the ¼” FNPT labeled “Instrument Air Inlet” in figure 6.
NOTE: Instrument air must be oil-free and between 30-150 psig.
B
A