Washing drum, Door seal, Drain pump – AEG LAVAMAT 54840 User Manual

Page 26

Advertising
background image

2. Remove the conditioner insert from the middle compartment.

3. Clean all parts with water.

4. Put the conditioner insert in as far as it will go, so that it is firmly in place.

5. Clean all parts of the washing ma-

chine, especially the nozzles in the top
of the washing-in chamber, with a
brush.

6. Insert the detergent dispenser drawer

in the guide rails and push it in.

Washing drum

Rust deposits in the drum may occur due to rusting foreign bodies in the
washing or tap water containing iron.

Important! Do not clean the drum with acidic descaling agents, scouring agents
containing chlorine or iron or steel wool.

1. Remove any rust deposits on the drum with a cleaning agent for stainless

steel.

2. Run a washing cycle without any washing to clean off any cleaning agent

residues. Programme: COTTONS 95, press the « SUPERSNEL RAPIDE» (Extra
Quick) button, add approx. 1/2 measuring cup of detergent.

Door seal

Check from time to time the door seal and eliminate
eventual possible objects that could be trapped in the
fold.

Drain pump

The pump should be inspected regularly and particularly if

• the machine does not empty and/or spin

• the machine makes an unusual noise during draining due to objects such as

safety pins, coins etc. blocking the pump.

Proceed as follows:

1. Disconnect the appliance.

2. If necessary wait until the water has

cooled down.

3. Open the pump door.

26

Care and cleaning

132970011.qxd 23/04/2009 10.25 Pagina 26

Advertising