AEG LAVAMAT 54840 - Manual (Page 36)

Installation
Unpacking
All transit bolts and packing must be removed
before using the appliance.
You are advised to keep all transit devices so that
they can be refitted if the machine ever has to be
transported again.
1. After removing all the packaging, carefully lay
machine on it’s back to remove the
polystyrene base from the bottom.
2. Remove the power supply cable and the draining hose
from the hose holders on the rear of the appliance.
3. Unscrew the three bolts with the supplied
spanner
4. Slide out the relevant plastic spacers.
36 Installation
HEC0008
HEC0036
HEC0030
HEC0037
132970011.qxd 23/04/2009 10.25 Pagina 36