Alpine 68-21627Z13-A - Manual (Page 18)

18
-EN
Setting
You can flexibly customize the unit to suit your own preferences and
usage. From the SETUP menu, GENERAL Setting, DISPLAY Setting,
etc., can be modified.
1
Press and hold AUDIO SETUP for at least 2 seconds to
activate the SETUP mode.
2
Turn the Rotary encoder to select the desired item, and
then press
ENTER.
(e.g. Select GENERAL )
AUDIO *1  GENERAL  DISPLAY  iPod  BLUETOOTH *2
GENERAL:
CLOCK ADJ *3  AUX SETUP  AUX NAME *4  PLAY MODE 
DEMO
DISPLAY:
DIMMER  SCROLLTYPE
iPod:
iPod LIST
*1 Refer to “Audio Setup” on page 13.
*2 Refer to “BLUETOOTH SETUP” on page 20.
*3 Refer to “Setting Time” on page 9.
*4 Displayed only when AUX SETUP is set to ON.
3
Turn the Rotary encoder to select a setting item, and then
press
ENTER.
(e.g. Select AUX SETUP)
4
Turn the Rotary encoder to change the setting, and then
press
ENTER.
(e.g. Select AUX ON or AUX OFF.)
5
Press and hold AUDIO SETUP for at least 2 seconds to
return to normal mode.
Notes
• Press  to return to the previous mode.
• Pressing and holding  for at least 2 seconds will return to normal
mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
GENERAL is selected on the setup main menu in step 2.
Setting the AUX SETUP Mode
You can input the audio of an external device, (such as a Portable audio
player) to the AUX connector of this unit.

Setting item: AUX SETUP
Setting contents:
AUX OFF / AUX ON (Initial setting)
AUX OFF:
When set to OFF, AUX source cannot be selected.
AUX ON
*
:
Set to ON when a portable device is connected. If SOURCE  is
pressed and AUX is selected, the sound of the portable device is
input to the unit.
* You can change the AUX NAME display when AUX SETUP is
set to ON. Press ENTER when AUX SETUP is set to ON,
and select AUX NAME by turning the Rotary encoder, then
press ENTER. After that, turn the Rotary encoder to
select the desired AUX NAME.
Note
• When the PORTABLE is set, PMD is displayed on the unit.
Playing MP3 Data (PLAY MODE)
This unit can play back CDs containing both CD and MP3 data (created
in Enhanced CD (CD Extra) format). However, in some situations,
playback of an enhanced CD may be difficult. In this case, you can select
playback of a single session only, containing the CD data. When a disc
contains both CD and MP3 data, playback starts from the CD data
portion of the disc.

Setting item: PLAY MODE
Setting contents:
CD-DA / CDDA/MP3 (Initial setting)
CD-DA:
Only the CD data in Session 1 can be played back.
CDDA/MP3:
CD data, MP3 files in mixed mode, and multi-session discs can be
played back.
Note
• Perform this setting before inserting a disc. If a disc has already been
inserted, remove it first.
Demonstration
This unit has a demonstration feature for the display.

Setting item: DEMO
Setting contents:
DEMO OFF (Initial setting) / DEMO ON
Note
• To quit Demo mode, set to DEMO OFF.
SETUP
Use steps 1 to 5 to select one of the SETUP modes to modify.
See the applicable section below for details about the
selected SETUP item.
SOURCE/ 
AUDIO/SETUP
Rotary encoder
ENTER 
General Setting