Alpine 68-21627Z13-A - Manual (Page 26)

26
-EN
Playing MP3 Files from Flash Memory
(optional)
If you connect a Flash Memory Device containing MP3, MP3 files can
be played back.
1
Press SOURCE  to switch to the USB AUDIO mode.
2
To pause playback, press .
Pressing  again will resume the playback.
Notes
• The root folder is displayed as “ROOT” in the Folder Name Search
mode.
• This unit plays back files in Flash Memory with the same controls and
modes as playback of CDs containing MP3. For details, refer to “CD/
MP3” on page 10.
• Before disconnecting Flash Memory, be sure to change to another source
or set to pause.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
Flash Memory Connection (optional)
1
Open the cover of the USB Port.
2
Connect the Flash Memory directly to the USB Port, or via
the USB cable.
1
Carefully, pull out the Flash Memory Device from the USB
cable or the USB Port.
2
Close the cover of the USB Port.
Notes
• Change to a source other than the Flash Memory mode, and then
remove the Flash Memory Device. If Flash Memory is removed in the
Flash Memory mode, data may be damaged.
• When removing Flash Memory, pull it out straight.
• If sound is not output or Flash Memory is not recognized even when
connected, remove the Flash Memory Device once, and then connect it
again.
• Route the USB cable away from other cables, etc.
• After removing the Flash Memory, close the cover of the USB Port to
prevent dust or foreign objects from entering and causing a
malfunction.
About MP3 File of Flash Memory
Playing back MP3
MP3 files are prepared, and then stored to a Flash Memory Device. This
unit can recognize at most 100 folders and 100 files per folder stored in
Flash Memory. Playback may not be performed if a Flash Memory
Device exceeds the limitations described above.
Do not make a file’s playback time more than 1 hour.
Media supported
This device can play back Flash Memory.
Corresponding File Systems
This device supports FAT 12/16/32 for Flash Memory device.
Flash Memory (optional)
Connect Flash Memory
SOURCE/ 

USB Connection Terminal This unit
Flash Memory
(sold separately)
or
Flash Memory
(sold separately) Cable (sold
separately)
Remove Flash Memory