ADC Soneplex P-61-743 User Manual

Page 2

Advertising
background image

ADCP-61-743

• Issue 3 • September 2004

Page 2

 2004, ADC Telecommunications, Inc.

Related Publications

Listed below are related manuals and their publication numbers. Copies of these publications
can be ordered by contacting the ADC Technical Assistance Center at 1-800-366-3891.

Title

ADCP Number

Soneplex Broadband System Description, Design, and Application Manual (V5) ADCP-61-472

Soneplex Broadband System Operation and Maintenance Manual (V5)

ADCP-61-471

Soneplex DS3 MUX Module Installation Instructions

ADCP-61-742

Soneplex System Installation Manual

LTPS-UM-8010

Soneplex Shelf Controller Unit (V4.1) User Manual

LTPS-UM-8031

Admonishments

Important safety admonishments are used throughout this manual to warn of possible hazards
to persons or equipment. An admonishment identifies a possible hazard and then explains what
may happen if the hazard is not avoided. The admonishments — in the form of Dangers,
Warnings, and Cautions — must be followed at all times. These warnings are flagged by use of
the triangular alert icon (seen below), and are listed in descending order of severity of injury or
damage and likelihood of occurrence.

Danger: Danger is used to indicate the presence of a hazard that will cause severe personal

injury, death, or substantial property damage if the hazard is not avoided.

Warning: Warning is used to indicate the presence of a hazard that can cause severe personal

injury, death, or substantial property damage if the hazard is not avoided.

Caution: Caution is used to indicate the presence of a hazard that will or can cause minor

personal injury or property damage if the hazard is not avoided.

General Safety Precautions

Caution: Electronic modules can be damaged by electrostatic discharge (ESD). Before

handling modules, wear an anti-static discharge wrist strap to prevent damage to electronic
components. Place modules in anti-static packing material when transporting or storing. When
working on modules, always place them on an approved anti-static mat that is electrically
grounded.

Advertising