Asus Motherboard P5CR-VM - Manual (Page 82)

4 - 2 2 4 - 2 2 4 - 2 2 4 - 2 2 4 - 2 2 C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p
Redirection after BIOS POST [Always] Redirection after BIOS POST [Always] Redirection after BIOS POST [Always] Redirection after BIOS POST [Always] Redirection after BIOS POST [Always]
Sets the redirection mode after the BIOS Power-On-Self-Test (POST). Some
operating systems may not work when this item is set to [Always].
Configuration options: [Disabled] [Boot Loader] [Always]
Terminal Type Terminal Type Terminal Type Terminal Type Terminal Type [ANSI] [ANSI] [ANSI] [ANSI] [ANSI]
Allows you to select the target terminal type.
Configuration options: [ANSI] [VT100] [VT-UTF8]
VT-UTF8 Combo Key Support [Enabled] VT-UTF8 Combo Key Support [Enabled] VT-UTF8 Combo Key Support [Enabled] VT-UTF8 Combo Key Support [Enabled] VT-UTF8 Combo Key Support [Enabled]
Enables or disables the VT-UTF8 combo key support for ANSI or VT100
terminals. Configuration options: [Disabled] [Enabled]
Sredir Memory Display Delay [No Delay] Sredir Memory Display Delay [No Delay] Sredir Memory Display Delay [No Delay] Sredir Memory Display Delay [No Delay] Sredir Memory Display Delay [No Delay]
Gives the delay period (in seconds) to display memory information.
Configuration options: [No Delay] [Delay 1 Sec] [Delay 2 Sec] [Delay 4
Sec]
4.4.4 4.4.4 4.4.4 4.4.4 4.4.4 CPU Configuration CPU Configuration CPU Configuration CPU Configuration CPU Configuration
The items in this menu show the CPU-related information that the BIOS
automatically detects.
Configure advanced CPU Settings
Manufacturer : Intel
Brand String : Genuine Intel (R) CPU 3.20GHz
Frequency
: 3200 MHz
FSB Speed : 800 MHz
Cache L1 : 16 KB
Cache L2 : 1024 KB
Cache L3 : 0 KB
Ratio Status: Unlocked
Ratio Actual Value : 16
Ratio CMOS Setting: [ 24]
VID CMOS Setting: [ 62]
Microcode Updation: [Enabled]
Max CPUID Value Limit: [Disabled]
Enhanced C1 Control [Auto]
CPU Internal Thermal Control [Auto]
Hyper Threading Technology [Enabled]
Sets the ratio between
CPU Core Clock and the
FSB Frequency.
NOTE: If an invalid
ratio is set in CMOS
then actual and
setpoint values may
differ.
Ratio CMOS Setting [24] Ratio CMOS Setting [24] Ratio CMOS Setting [24] Ratio CMOS Setting [24] Ratio CMOS Setting [24]
Sets the ratio between the CPU Core Clock and the Front Side Bus
frequency. The default value of this item is auto-detected by BIOS. Use the
<+> or <-> keys to adjust the values.