5 chipset chipset chipset chipset chipset – Asus Motherboard P5CR-VM User Manual

Page 84

Advertising
background image

4 - 2 4

4 - 2 4

4 - 2 4

4 - 2 4

4 - 2 4

C h a p t e r 4 : B I O S s e t u p

C h a p t e r 4 : B I O S s e t u p

C h a p t e r 4 : B I O S s e t u p

C h a p t e r 4 : B I O S s e t u p

C h a p t e r 4 : B I O S s e t u p

4.4.5

4.4.5

4.4.5

4.4.5

4.4.5

Chipset

Chipset

Chipset

Chipset

Chipset

The Chipset menu allows you to change the advanced chipset settings.
Select an item then press <Enter> to display the sub-menu.

Advanced Chipset Settings

Advanced Chipset Settings

Advanced Chipset Settings

Advanced Chipset Settings

Advanced Chipset Settings

Configure DRAM Timing by SPD [Enabled]

Configure DRAM Timing by SPD [Enabled]

Configure DRAM Timing by SPD [Enabled]

Configure DRAM Timing by SPD [Enabled]

Configure DRAM Timing by SPD [Enabled]

When this item is enabled, the DRAM timing parameters are set according
to the DRAM SPD (Serial Presence Detect). When disabled, you can
manually set the DRAM timing parameters through the DRAM sub-items.
Configuration options: [Disabled] [Enabled]

The following sub-items appear when this item is Disabled.

DRAM CAS# Latency [5 Clocks]
Controls the latency between the SDRAM read command and the time
the data actually becomes available.
Configuration options: [5 Clocks] [4 Clocks] [3 Clocks]

DRAM RAS# Precharge [4 Clocks]
Controls the idle clocks after issuing a precharge command to the DDR
SDRAM. Configuration options: [2 Clocks] [3 Clocks] [4 Clocks]
[5 Clocks]

DRAM RAS# to CAS# Delay [4 Clocks]
Controls the latency between the DDR SDRAM active command and
the read/write command. Configuration options: [2 Clocks] [3 Clocks]
[4 Clocks] [5 Clocks]

DRAM RAS# Activate to Precharge Delay [15 Clocks]
Configuration options: [1 Clock] ~ [15 Clocks]

DRAM Write Recovery Time [4 Clocks]
Sets the DRAM write recovery time.
Configuration options: [2 Clocks] [3 Clocks] [4 Clocks] [5 Clocks]

Enable or disable
DRAM timing.

Advanced Chipset Settings

Configure DRAM Timing by SPD

[Enabled]

DRAM ECC Mode

[Enabled]

Hyper Path 2

[Auto]

Booting Graphic Priority

[Internal VGA]

Onboard LAN Boot ROM

[Disabled]

Advertising
This manual is related to the following products: