General information – Bosch PPW3320 Analysewaage elektronisch AxxenceSlimLine Analysis User Manual

Page 7

Advertising
background image

Robert Bosch Hausgeräte GmbH

7

Note: If no button is pressed within 15 sec.

during programming, the scales automatically

switch off. If the Navigation buttons  are held

down for longer, the numerical sequence is

accelerated.

Inputting personal data

Fig. 4

Switch on the scales and wait until 

is indicated.
Press the SET button. The setting for

the personal memory location flashes.
Using the Navigation buttons , select

the personal memory location from 1–10.

Confirm by pressing SET button.

The symbol for (female) or (male) now

flashes.

Using the Navigation buttons ,

select your sex.
Confirm by pressing SET button.

The setting for input age flashes.
Using the Navigation buttons ,

set your age.

Press the SET button. The setting for height

input flashes.
Using the Navigation buttons ,

set your height.
Confirm by pressing SET button.

Now all settings are displayed for approx.

2 seconds,  is indicated on the display.
The scales automatically switch off after

a couple of seconds.

To assign other memory locations, repeat

the Inputting personal data process.
Note: Memory locations which are already

occupied can be reprogrammed at any time.

Starting the analysis

Measurement of weight as well as BMI,

the percentage of body fat and body water.
Fig. 5

Switch on the scales and wait until 

is indicated.
Using the USER button, select the pro-

grammed personal memory location, e.g. 2.

The input personal data is displayed for

2 seconds.

As soon as the scales display , step

on the scales and stand still for as long as

the display flickers. Distribute your weight

evenly on both legs.

Note: Stand on the scales with bare feet only.

Initial display for approx. 3 seconds

– Weight in kg
The analysis function now requires a few

seconds to perform the measurement and

calculation.
Successive displays on display

– Weight in kg
– the Body Mass Index BMI,

– the body fat percentage FAT,

– the body water percentage

,

for approx. 3 seconds each.
These displays are automatically repeated

2x in succession.
Important: Stand with feet, calves and thighs

apart, otherwise the measurement will

be incorrect.

The scales automatically switch off a couple

of seconds after the end of the measuring

process.

General information

The measurements are only an indication

of long-term changes. You are not replacing

medical observation or consultation.

For more detailed information on the meaning of

the body fat content and body water content

and the values ideal for you, please consult

your GP.
Tip: To obtain comparable measurements,

weigh yourself every day at the same time

and under the same conditions (recommended

three hours after eating or sport).
Note: The measurement results are not reliable

for children under 10 years of age.

en

Advertising
This manual is related to the following products: