Sensor function – Bosch PHS8667 Haarglätter ProSalon SensorProtection User Manual

Page 15

Advertising
background image

11

PHS8667 11/2012

11

en

Use

[

Risk of burns!

Never allow appliance to come into contact

with skin (scalp or ears).

You can use the hair straightener to

straighten or curl your hair.

● Only use the appliance on dry hair.

Note: Fine hair responds particularly quickly

to the treatment with the heating plates.

Please take note of the temperature

recommended for your own hair type under

“Operation”.

The even heat emission of the heating

plates is especially gentle on the hair.

The result is smooth hair with an intensive,

silky shine.

Important: Never apply in one place for

longer than 2 seconds.

Sensor function

In order to protect the hair against damage

when straightening, the pressure applied

to the hair must not be too strong. This is

why the hair straightener has been fitted

with a sensor function. The pressure on

the hair strands is monitored by means

of the flexibly mounted heating plates.

To activate the sensor function press the

Sensor button. If the pressure applied to

the hair is in the normal, non-critical range,

the

Sensor button will light up green. If the

pressure is too great, the grip of the hair

straightener will start to vibrate and the

Sensor button will light up red. Press the

heating plates together with less force.

When switched off, the

Sensor button will

not light up.

Info: Only switch on the sensor function for

“straightening” hair. Switch off the sensor

function when “curling” hair.

Straightening your hair

(Image sequence

A)

The appliance is suitable for both long and

short hair.

● Comb the hair and section it into even

strands (approx. 5 cm wide).

● Switch on the

Sensor button; the button

lights up green.

● Set the locking device to

U

.

● Starting from the roots, place a strand of

hair between the plates (Figure

a).

● Press the plates together and pull down

gently and evenly toward the ends of the

hair (Figure

b).

● Treat all strands in the same manner.

Allow hair to cool completely before

styling.

Tip: For shoulder-length hair, each strand

should take about 10 seconds.

Curling your hair

There are three methods for curling hair.

For each method, separate dry hair into

even sections, roughly 2 cm wide. The finer

the strand, the tighter the curl.

Curling with volume in the entire hair

(Image sequence

B)

● Hold the hair straightener level, place the

strand of hair between the heating plates

and close them.

● Turn the straightener 180° and wrap the

strand once around the upper heating

plate.

● Press the plates firmly together and pull

the straightener down to the ends of the

hair at a steady pace. Hold down the

section of hair to be straightened using

your free hand.

● Now open the plates.

Advertising
This manual is related to the following products: