Alpine DCS-BT1 - Manual (Page 4)

ALPINE DCS-BT1 USER GUIDE ALPINE DCS-BT1 USER GUIDE
Power on / off
Action Tone / Voice LED indication
Power on
Power off
Press and hold the
activity button for
3 seconds.
Press and hold the
activity button for
3 seconds.
You will hear melody
as the power is turned
on.
You will hear the voice
prompt “Powering
down”
Blue LED blinks 5
times.
Blue LED is on for
2 seconds and then
turns off.
1. While the power is turned off, press
and hold the activity button for
6 seconds.
2. You will hear the melody indicating
that the power is on.
After that, you will hear the voice
prompt “Please pair phone now,
Enter pin code”
Activity
button
3. When in pairing mode, the Blue LED indicator will blink rapidly.
4. Using your handset, find the ‘Bluetooth menu’ and ‘search for’
or ‘add’ new device.
Search Device
Input Password
Search Device
Alpine DCS-BT1
5. Select ‘Alpine DCS-BT1’ from the
list of devices and pair it with
your handset.
The method of pairing or
screen indication may be
different depending on the
handset model.
6. When asked for the Pass/PIN
code during the pairing
procedure, please enter ‘0000’
NOTE
The Alpine DCS-BT1 may not be compatible with all handsets.
Pairing
6 7
Blue LED
7. If pairing was successful, you will hear the voice prompt
“Connected to phone”
The Blue LED indicator blinks once every 5 seconds.
NOTE