Alpine DCS-BT1 - Manual (Page 7)

Summary of LED Indication
ALPINE DCS-BT1 USER GUIDE ALPINE DCS-BT1 USER GUIDE
Change language
The Alpine DCS-BT1 supports 9 languages.
NOTE
1. Push the language button for
1 seconds.
2. Current language is announced.
3. Push the language button briefly,
you will hear the next language.
4. Select preferred language and push
the language button for 1 seconds.
5. You will hear the selected new
language.
12 13
Blue LED blinks 5 times
LED Indicator DCS-BT1 status
Power on
Power off
Connected
(Stand-by)
Pairing mode
Active call
Incoming call
Play music
Charging
Blue LED blinks quickly
Blue LED is on for 2 seconds and then turns off
Blue LED blinks once every 5 seconds
Disconnected Blue LED blinks every 5 seconds
Blue LED blinks twice every second
Blue LED is on
Blue LED pulses
Red LED is on
Charging complete Red LED is off
Low battery
Red LED blinks once every 5 seconds. (Standby)
Red LED is on (Active call)
UK English
US English
French
Italian
German
Spanish
Mexican Spanish
Brazilian Portuguese
Mandarin Chinese
Voice prompt off (Beep tone)
Default language is US English.
1
2
3
4
5
6
7
8
9
10
Tip
It is possible to change language, in ‘Pairing mode’ state.
Push the language button briefly, when beep tone is heard
push the language button for 1 seconds.
Voice prompt will be off.
Language
Button