Alpine DCS-BT1 - Manual (Page 8)

DCS-BT1 does
not turn on.
Unable to
communicate with
DCS-BT1 Check to see if handset
supports Bluetooth
wireless technolgy. Check whether your handset
supports Bluetooth wireless
technology or Handsfree Profiles.
Check whether the
battery of the DCS-BT1
is fully charged.
Recharge the battery.
Unable to pair the
handsfree with
the Bluetooth
wireless
technology
handset device
Check whether the
battery of the DCS-BT1
is low.
Charge the battery.
Check and make sure
the DCS-BT1 is on.
Press and hold the Activity
button for 3 seconds to
turn on DCS-BT1
Check and make sure
the DCS-BT1 is placed
in pairing mode.
With the power off, press and
hold the Activity button for
6 seconds to place DCS-BT1
in pairing mode.
Check the speaker
volume. Turn the knob clockwise for
volume up.
Volume of
the DCS-BT1
is too low
Troubleshooting
ALPINE DCS-BT1 USER GUIDE ALPINE DCS-BT1 USER GUIDE
14 15
Appendix
Version 2.1 + EDR
Headset / Handsfree / A2DP / AVRCP
2.402 ~ 2.480 MHz
0.25 ~ 2.5 mW
82g
Up to 33 feet (10meters)
3.7V, Li-Polymer
-10°C ~ 60°C
Up to 14 hours
Up to 300 hours
< 3 hours
Alpine DCS-BT1
Bluetooth specification
Supported Bluetooth Profiles
Output power
Frequency range
Operating Range
Weight
87mm(L) x 65mm(W) x 32mm(H) Dimensions
Operating Temperature
Battery type
Talk time
Standby time
Charging time
Time of battery may differ from the above, depending on your using
conditions and circumstances.
Specification and Features
Model number