AMD 7ZX-1 - Manual (Page 18)

7ZX-1 Motherboard
13
JP11: Front USB Device Wake up Selection (USB Port USB2)
1
Pin No. Definition
1-2 close Normal (Default)
2-3 close
Enabled Front USB Device
Wake up
USB2
(If you want to use "USB Dev Wakeup From S3-S5"
function, you have to set the BIOS setting "USB Dev
Wakeup From S3-S5" enabled, and the jumper "JP11"
enabled).
*(Power on the computer and as soon as memory
counting starts, press <Del>. You will enter BIOS Setup.
Select the item "POWER MANAGEMENT SETUP", then
select "USB Dev Wakeup From S3-S5: Enabled".
Remember to save the setting by pressing "ESC" and
choose the "SAVE & EXIT SETUP" option.)
JP10: BIOS Write Protection (Optional)
Pin No. Definition
ON Write Protect Enable
OFF
Write Protect Disable
(Default)
1
Please Set Jumper JP10 to ”OFF” to enabled
BIOS Write Function when you update new BIOS
or new device
JP3: Clear CMOS Function (Optional)
Pin No. Definition
1-2 close Normal (Default)
2-3 close Clear CMOS
1