AMD 7ZX-1 - Manual (Page 38)

7ZX-1 Motherboard
33
Integrated Peripherals
Figure 9: Integrated Peripherals
This items will be available when ”Serial PortB Mode” is set to IrDA or ASK IR.
♦
These eight items will be shown when there are only AC’97 CODEC sound.
•
On Board Serial Port A
Auto BIOS will automatically setup the port A address.
(Default Value)
3F8/COM1 Enable on Board Serial port A and address to 3F8.
2F8/COM2 Enable on Board Serial port A and address to 2F8.
3E8/COM3 Enable on Board Serial port A and address to 3E8.
2E8/COM4 Enable on Board Serial port A and address to 2E8.
Disabled Disable on Board Serial port A.
•
On Board Serial Port B
Auto BIOS will automatically setup the port B address.
(Default Value)
3F8/COM1 Enable on Board Serial port B and address to 3F8.
2F8/COM2 Enable on Board Serial port B and address to 2F8.
3E8/COM3 Enable on Board Serial port B and address to 3E8.
2E8/COM4 Enable on Board Serial port B and address to 2E8.
Disabled Disable on Board Serial port B.
•
Serial Port B Mode
Normal Normal operation. (Default Value)
IrDA Onboard I/O chip supports IRDA
ASK IR Onboard I/O chip supports ASK IR.
•
Duplex Mode
Half Duplex IR Function Duplex Half.
N/A Disabled this function. (Default Value)
Full Duplex IR Function Duplex Full.
•
On Board Parallel port
378 Enable On Board LPT port and address to 378.
278 Enable On Board LPT port and address to 278.
3BC Enable On Board LPT port and address to 3BC.
Auto Set On Board LPT port to Auto. (Default Value)
Disabled Disable On Board LPT port.
AMIBIOS SETUP – INTEGRATED PERIPHERALS
( C ) 1999 American Megatrends, Inc. All Rights Reserved
OnBoard Serial Port A Auto
OnBoard Serial Port B Auto
Serial PortB Mode Normal
Duplex Mode N/A
OnBoard Parallel Port Auto
Parallel Port Mode ECP
Parallel Port DMA Auto
Parallel Port IRQ Auto
AC97 Audio Auto
MC97 Modem Auto
♦ OnBoard Legacy Audio Enabled
♦ Sound Blaster Disabled
♦ SB I/O Base Address 220h-22Fh
♦ SB IRQ Select 5
♦ SB DMA Select 1 ESC: Quit ↑↓→ ← : Select Item
♦ MPU-401 Disabled F1 : Help PU/PD+/-/ : Modify
♦ MPU-401 I/O Address 330h-333h F5 :Old Values (Shift)F2:Color
♦ Game Port(200h-207h) Enabled F6 : Load BIOS Defaults
F7 : Load SETUP Defaults