AMD 7ZX-1 - Manual (Page 31)

BIOS Setup
26
Chipset Features Setup
Figure 4: Chipset Features Setup
••••
DRAM Frequency
100MHz Set DRAM Frequency to 100MHz.
133MHz Set DRAM Frequency to 133MHz.
••••
SDRAM CAS# Latency
2 For Fastest SDRAM DIMM module.
3 For Slower SDRAM DIMM module.
Auto Detect SDRAM CAS# Latency by SPD. (Default Value)
••••
AGP Mode
4X Set AGP Mode to 4X. (Default Value)
1X Set AGP Mode to 1X.
2X Set AGP Mode to 2X.
••••
AGP Comp. Driving
Auto Set AGP Comp. Driving to Auto. (Default Value)
Manual Set AGP Comp. Driving to Manual.
If AGP Comp. Driving is Manual.
Manual AGP Comp. Driving : 00~FF
••••
AGP Aperture Size
4MB Set AGP Aperture Size to 4MB.
8MB Set AGP Aperture Size to 8 MB.
16MB Set AGP Aperture Size to 16 MB.
32MB Set AGP Aperture Size to 32 MB.
64MB Set AGP Aperture Size to 64 MB. (Default Value)
128MB Set AGP Aperture Size to 128 MB.
256MB Set AGP Aperture Size to 256 MB.
••••
PCI Delay Transaction
Enabled Enabled Delay Transaction. (Default Value)
Disabled Disabled Delay Transaction.
AMIBIOS SETUP – CHIPSET FEATURES SETUP
( C ) 1999 American Megatrends, Inc. All Rights Reserved
*********DRAM Timing*** CAS# Drive 12 mA
DRAM Frequency Auto RAS# Drive 24 mA
SDRAM CAS# Latency Auto
AGP Mode 4X
AGP Comp. Driving Auto
Manual AGP Comp. Driving DB
AGP Aperture Size 64MB
PCI Delay Transaction Enabled
USB Controller Enabled
USB Legacy Support Disabled
USB Port 64 / 60 Emulation Disabled
BIOS Flash Protection Disabled
DRAM Drive Strength Auto
MD Bus Strength High
CAS Bus Strength High ESC : Quit
↑↓→ ←
: Select Item
Delay DRAM Read Latch 1.0ns F1 : Help PU/PD+/-/ : Modify
Memory Data Drive 8 mA F5 : Old Values (Shift)F2:Color
SDRAM Command Drive 24 mA F6 : Load BIOS Defaults
Memory Address Drive 24 mA F7 : Load SETUP Defaults