Alpine 68-21627Z10-A - Manual (Page 12)

12
-EN
Receiving a Multicast Station
(HD Radio mode only)
Multicasting is the ability to broadcast multiple program streams over a
single FM frequency. This increases the amount and diversity of content
choices. A maximum of eight multicast station channels can be selected
on this unit.
Note
• Make sure LISTENMODE is set to other than ANALOG (refer to
“Switching the listening mode” on page 24).
When multicast station is received, the program number
and the Multicast indicator lights up. Press
 or  to
select the desired program service.*
Receiving the Multicast Station Program Service.
Program Service example:
* This operation can be performed only when MC SEEK is set to ON
(refer to “Setting the Multicast Seek” on page 24).
Storing the tag information
(HD Radio mode only)
iTunes Tagging lets you tag songs heard on HD Radio stations. You can
preview, buy and download later, songs from your iTunes tagged playlist
the next time you sync your iPod/iPhone. If the unit is connected to a
Tagging compatible iPod/iPhone, you can use the iTunes Tagging
function. For details, refer to the Owner’s Manual of the Tagging
compatible iPod/iPhone.
The m indicator will light when a song playing on an HD Radio
station has tag information available.
Press and hold VIEW k/Tag for at least 2 seconds to save
its tag information.
If no iPod/iPhone is connected, “TAG COUNT X” is displayed (X is
the total number of tagged songs stored in this unit).
Notes
• During tagging, the iPod/iPhone takes priority to save the tag
information. If no iPod/iPhone is connected, the tag information is
saved to this unit.
• When the memory of iPod/iPhone is full, “iPod FULL” and “TAG
COUNT X” are displayed. The tag information will be stored to the
unit.
• If the operation is failed, “CANNOT TAG” is displayed.
• This unit can store a maximum of 50 tagged songs. When the memory
of the unit is full, “TAGCOUNT50” and “MEMO FULL” are displayed.
• When an iPod that doesn’t support the tagging function is connected,
“NON-TAGGING IPOD” is displayed.
• When the iPod/iPhone is disconnected from the unit during tagging, its
tag information will be stored in the unit.
• If there is stored tag information on the unit, when an iPod/iPhone
supporting the tag function is connected, the stored tag information will
be transferred to the iPod/iPhone automatically. When the iPod/iPhone
memory becomes full, “iPod FULL” will be displayed, and any
remaining tag information on the unit will not be transferred to the
iPod/iPhone.
• If a tagged song already exists, “ALREADY TAGGED” will be displayed
when you try to tag the song again.
About the Feature Logos
• Digital, CD-quality sound. HD Radio Technology enables local radio
stations to broadcast a clean digital signal. AM sounds like today’s
FM and FM sounds like a CD.
• Program Service Data: Contributes to the superior user experience of
HD Radio Technology. Presents song name, artist, station IDs, HD2/
HD3 Channel Guide, and other relevant data streams.
• Adjacent to traditional main stations are extra local FM channels.
These HD2/HD3 Channels provide new, original music as well as
deep cuts into traditional genre.
• iTunes
®
Tagging provides you the opportunity to discover a wide
range of content and the means to “tag” that content for later review
and purchase from the iTunes
®
Store.
Multicast Radio
Station
Program No. Program Service
88.1 MHz 1 Main Program Service
88.1 MHz 2 Sub-program Service
88.1 MHz 3 Sub-program Service
|
|
|
|
88.1 MHz 8 Sub-program Service
Program No.
Multicast indicator