Alpine 68-21627Z10-A - Manual (Page 27)

27
-EN
For details on the control from a BLUETOOTH compatible device, refer
to the Owner’s Manual of the BLUETOOTH compatible device.
Pairing a BLUETOOTH compatible device with
SSP (Secure Simple Pairing)
1
Using your BLUETOOTH compatible device, select the
“Alpine CD Receiver” for pairing.
2
Turn the Rotary encoder to change the head unit display
from “PAIR NO” to “PAIR YES”, and then press
ENTER.
If “PAIR NO” is selected, the connection will be canceled.
3
If the pairing was successful, “CONNECTED” is displayed
for a few seconds. The head unit then returns to its
previous state.
Pairing a BLUETOOTH compatible device without
SSP (Secure Simple Pairing)
1
Using your BLUETOOTH compatible device, select the
“Alpine CD Receiver” for pairing.
2
Input the PIN code (“0000”) in a BLUETOOTH compatible
device.
Note
• The PIN code is fixed as “0000”.
3
If the pairing was successful, “CONNECTED” is displayed
for a few seconds. The head unit then returns to its
previous state.
Notes
• If the connection is unsuccessful, “FAILED” is displayed.
• After a successful pairing, the two devices should re-pair automatically
whenever the vehicle’s ignition is turned ON.
• Set “VISIBLE M” to VISI M ON to enable this unit to be recognized by
a BLUETOOTH compatible device, refer to “Setting the Visible Mode”
on page 28.
• You can also manually pair the BLUETOOTH devices from this unit.
For details, refer to “Pairing a BLUETOOTH Device from the unit” on
page 28.
BLUETOOTH Setup
The following steps 1 to 5 are common to the various BLUETOOTH
functions. For details, refer to each individual function.
Note
• Set “HFP”, “AUDIO” or “BT PANDORA” to ON, and then perform
BLUETOOTH SETUP operation. Refer to “Setting the BLUETOOTH
Connection (BT IN)” on page 27.
1
Press and hold AUDIO SETUP for at least 2 seconds to
activate the SETUP mode.
2
Turn the Rotary encoder to select “BLUETOOTH”, and then
press
ENTER.
The BLUETOOTH setup mode is activated.
Note
• The BLUETOOTH setup mode can also be activated by pressing and
holding BT SETUP for at least 2 seconds.
3
Turn the Rotary encoder to select the desired items, and
then press
ENTER.
BLUETOOTH:
BT IN *1  PAIRED DEV  VISIBLE M *1  SEARCH DEV *1 
CALL SOUND *2  SENDER ID *2  PB UPDATE *2  PB ORDER *2
 AUTO ANS *2  SEV NAME *2  SPEAKER SL *2 
FW VERSION  FW UPDATE *1
*1 The items are not displayed during a phone call.
*2 The items are not displayed when “HFP” is set to OFF. Refer
to “Setting the BLUETOOTH Connection (BT IN)” on
page 27.
4
Turn the Rotary encoder to change the settings.
5
Press and hold AUDIO SETUP for at least 2 seconds.
The SETUP mode is canceled.
Notes
• Press  to return to the previous mode.
• Pressing and holding  for at least 2 seconds will return to normal
mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
With BLUETOOTH technology, you can place a hands-free call by a
BLUETOOTH-equipped mobile phone.
Audio information of a BLUETOOTH compatible mobile phone, a
portable audio player, etc., is controllable/playable wirelessly from this
unit.
Pandora
®
internet radio on a BLUETOOTH compatible smartphone
(which runs Android OS or BlackBerry OS) is controllable/playable
wirelessly from this unit.

Setting item: BT IN

Further setting items: HFP / AUDIO / BT PANDORA
Setting contents:
OFF / ON (Initial setting)
Hands-Free Phone setting (HFP)
ON:
Select when you want to pair your BLUETOOTH compatible phone
with this unit.
OFF:
Hands-Free Phone function is not used.
Note
• When HFP is set to OFF, the indicators related to Hands-free phone
(c battery charge, i signal strength and h message) will not be
displayed.
BLUETOOTH Audio setting (AUDIO)
ON:
Select when you want to use BLUETOOTH Audio function or
Pandora
®
.
OFF:
BLUETOOTH Audio function or Pandora
®
is not used.
How to connect to a BLUETOOTH
compatible device (Pairing)
Setting the BLUETOOTH Connection
(BT IN)