Asus AP1720-E2 - Manual (Page 111)

5-7 ASUS AP1720-E2 barebone server
5.1.3 ASUS EZ Flash Utility
he ASUS EZ Flash feature allows you to update the BIOS without having
to go through the long process of booting from a floppy disk and using a
DOS-based utility. The EZ Flash utility is built-in the BIOS chip so it is
accessible by pressing <Alt> + <F2> during the Power-On Self Tests
(POST).
To update the BIOS using EZ Flash:
1. Visit the ASUS website (www.asus.com) to download the latest BIOS
file for the motherboard and rename the same to NCCH-DL.ROM.
2. Save the BIOS file to a floppy disk, then restart the system.
3. Press <Alt> + <F2> during POST to display the following.
4. Insert the floppy disk that contains the BIOS file to the floppy disk
drive. When the correct BIOS file is found, EZ Flash performs the BIOS
update process and automatically reboots the system when done.
EZFlash starting BIOS update
Checking for floppy...
EZFlash starting BIOS update
Checking for floppy...
Floppy found!
Reading file “NCCH-DL.rom”. Completed.
Start erasing.......|
Start programming...|
Flashed successfully. Rebooting.
A “Floppy not found!” error message appears if there is no floppy disk
in the drive. A “NCCH-DL.ROM not found!” error message appears if
the correct BIOS file is not found in the floppy disk. Make sure that you
rename the BIOS file to NCCH-DL.ROM.
Do not shutdown or reset the system while updating the BIOS to
prevent system boot failure!