Asus AP1720-E2 - Manual (Page 69)

2-49 ASUS AP1720-E2 barebone server
To install the front I/O board:
1. Place the I/O board in the
bracket, component side up.
Secure the front I/O board to the
bracket with a screw.
2. Position the I/O board into the
bay with the component side to
the left (close to the HDDs).
Connect the I/O cables to the
connectors on the back of the I/O
board.
3. Insert the I/O board into the bay
until the bracket fits the front
edge of the bay.
4. Secure the I/O board bracket
with a screw.
Front panel
audio cable plug
IEEE 1394
cable plug