Poweramp TPR SERIES - Manual (Page 14)

12 4111-0035 — Feb 2012
Aug 2012
INSTALLATION
12
1. Attach the four (4) springs to the lower spring bar.
2. Pull springs upward and slide over top spring
mount on the track roller plate.
3. Install right and left spring cover with clip nuts and
flat head screws provided.
4. Slide the carriage assembly into the roller track.
5. Position and bolt the lower spring bar to the bottom
of the TPR vehicle restraint carriage.
6. Install the motor cover and spring covers.
7. Install slope extension.
INSTALL VEHICLE RESTRAINT
INTO ROLLER TRACK PLATE
Use lifting device (e.g. crane, jack) when lifting carriage
(approx. 110 lbs.). Lifting by hand may cause back
injury.