PROLiNK PHS100 User Manual - Manual (Page 13)

13
2) Select the radio button “Local Preferred”.
Options for SMS
You may:
y
Change the SMSC number
y
Change the default routing
y
Change the valid time of sending SMS
1. Change the number of SMS service center
When a short message is sent, it will be kept in the SMSC until it reaches the receiver. This
number is the SMSC that your messages go to, and it can be obtained from the USIM card.
Change the number only under your service provider’s suggestion.
1) In the main window, select “OptionsÆSMS”;
2) Change the number of “Service Center” per requirement;
3) Click on “Apply” to save.
2. Change SMS Routing
SMS Routing is the preferred domain to send SMS. It will be either “CS preferred”
(default) or “PS preferred”:
1) In the main window, select “OptionsÆSMS”;
2) Select “CS preferred” or “PS preferred” in the dropdown list of “Routing” per
requirement.
3. Validity period of sending SMS
It is the length of time that your messages will be stored for on the network waiting to be sent.
If the receiver cannot receive SMS for disconnection or any other reasons (e.g., the capacity of
SMS is full), your message will be saved on the network for the time you specified here. If the
valid time has past, the messages won’t be sent.
1) In the main window, select “OptionsÆSMS”;
2) Select the time unit in “Unit” dropdown list, and time value in “Value”.
Unit Value
Hours 1 hour, 6 hours, 12 hours