PROLiNK PHS100 User Manual - Manual (Page 15)

15
y Manual – users will pick the network in PC Manager.
Security Options
USIM card is a microchip containing important information which will be used by the
network to identify you ID for available services.
There are two PINs in the card:
y
PIN1 is to enable/disable the security function of USIM card, preventing unauthorized
use of your account if the USIM card is lost or stolen.
y
PIN2 is to enable/disable Fixed Dialing Numbers, restricting outbound calls with limited
phone numbers.
You have limited times (usually 3) of entering PIN1 or PIN2. If you have incorrect inputs for
more than the limited times, the PIN will be locked up.
1. Enable / Disable PIN1
PIN1 is to prevent unauthorized users from using your USIM card. Once your USIM card has
been protected by activated PIN1, a correct PIN1 must be entered before using the USIM card in a
data card or other devices (such as a mobile phone).
Contact your carrier for PIN1 before you enable this feature.
Once the USIM card activated, PIN1 is required whenever you insert or restart your data
card.
1) In the main window, select “OptionsÆSecurity”;
2) If PIN1 is now disabled, click on “Enable” and enter the PIN1; Or if PIN1 is already
enabled, click on “Disable” and enter the PIN1 to disable the feature.
2. Change PIN1
1) In the main window, select “OptionsÆSecurity”;
2) If PIN1 is now disabled, enable it;
3) Click on “Change”;
4) Enter the old PIN1;
5) Enter the new PIN1;
6) Retype the new PIN1 to confirm;
7) Click on “OK” to save.
3. Unlock PIN1
1) Obtain the PUK1 code from your carrier;
2) Enter the PUK1;