PROLiNK PHS100 User Manual - Manual (Page 5)

5
Profiles (Dialup Configuration)
Add a dialup Configuration
1) Select "Home-->More Profiles";
2) Select "New", enter the Profile Name and choose a Network in the popup window; setup
for the dialup in the advanced options; click on "Finish" to save and close the window;
Each profile depends on the setup settings of the carriers. For example, China Mobile's GPRS
only requires to set the dialup number as *98#, APN "CMNET".
If the settings of CSD, DNS, PPP and TCP/IP are needed, click on "Advanced Settings" and
make proper selections. After completing, click on "OK" to save and close the window. Refer to
Windows' network properties for these settings.
Set AS Default
1) Select "Home-->More Profiles";
2) Choose a profile in the list, and then click on “Set As Default”.
Modify a dialup configuration
1) Select "Home-->More Profiles";
2) Choose a profile in the list, and then click on “View/Modify”;
3) Make proper modifications;
4) Click on “Finish” to save and close the window.
Delete a dialup configuration
1) Select "Home-->More Profiles";
2) Choose a profile in the list, and then click on “Delete”;
3) In the confirmation box, click on “OK” to proceed.
Restore
1) Select "Home-->More Profiles";
2) Click on “Restore” for initial settings.