PROLiNK PPL1201 User Manual - Manual (Page 23)

PROLiNK PPL1201 User Manual www.prolink2u.com
Version 1.00 Page 18 of 25 PPL1201
• Set Local Device Only
The button is used to change the network name of the local PROLiNK® PPL1201 Powerline AV Ethernet
Adapter only. All PROLiNK® PPL1201 Powerline AV Ethernet Adapter devices seen on the Main
configuration homepage prior to this will be no longer present in the new network, effectively making
the local devices not to communicate to the devices that were in the old logical network. Devices
previously set up with the same logical network (same network name) will appear in the device list
afterward selecting this option.
• Set All Devices
The button is used to change the logical network of all devices that appear on the Main tab screen
whose Device Password had been entered for the same logical network. A dialog window will appear to
report the success of this operation. For devices whose device passwords were not entered, this
operation will fail and will report a failure message.
Section 4 Section 4