1 led indicator – PROLiNK PPL1201 User Manual User Manual

Page 9

Advertising
background image

PROLiNK PPL1201 User Manual

www.prolink2u.com

Version 1.00

Page 4 of 25

PPL1201

Section 2 : Connecting Mechanism


The PROLiNK® PPL1201 Powerline AV Ethernet Adapter supports up to 200Mbps data rate. With this high speed
connection rate, the PROLiNK® PPL1201 Powerline AV Ethernet Adapter allows you to setup a high speed home
network by using your home existing electrical wiring. Simply plug the PROLiNK® PPL1201 Powerline AV Ethernet
Adapter
into an ordinary power outlet to extend your Cable/xDSL broadband connection or existing LAN network to
any other electrical outlet in any rooms of your house.

Take notes that the PROLiNK® PPL1201 Powerline AV Ethernet Adapter works in pairs. You need to plug one
PROLiNK® PPL1201 Powerline AV Ethernet Adapter into a power outlet for each computer (connect to the
computer LAN card) you want to connect (Network access); you will also need another PROLiNK® PPL1201
Powerline AV Ethernet Adapter
connected to your Cable/xDSL broadband (Ethernet port) in order to extend your
broadband connection or Internet surfing.

Section below describes the PROLiNK® PPL1201 Powerline AV Ethernet Adapter’s LED indicators, physical interface
and hardware connection mechanism.

2.1 LED Indicator

The LED indicator displays information about the device’s status.

Label Status

Description

ON

Another powerline adaptor is detected on the same
powerline network

OFF

Did not detect any other powerline adaptor on the same
powerline network

Powerline

Blinking The data is received or transmitted via Powerline

ON

The

PROLiNK® PPL1201 Powerline AV

Ethernet Adapter

is power on

Power

OFF

The

PROLiNK® PPL1201 Powerline AV

Ethernet Adapter

is not receiving power

ON

The Ethernet port is on and ready to
receiving/transmitting data

OFF

The Ethernet port is not connected or not power on

Ethernet

Blinking The Ethernet port is receiving/transmitting data

OFF

Did not detect any HomePlug 1.0 device on the same
powerline network





HP 1.0 DET

Blinking

Another HomePlug 1.0 device is detected on the same
powerline network

Section 2

Section 2

Advertising