Alliance Laundry Systems UF35PV - Manual (Page 34)

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Programming
F232059 32
Drain Drain is pressed after a wash, dilution rinse, or soak step is programmed in order to remove water from
the machine. A time must be assigned that will allow the machine to reach empty. There are always
three possible selections for the drain step. These are selected after you press the Drain key by pressing
key 1 for drain 1 (main drain), key 2 for a drain to reuse tank A, and key 3 for a drain to reuse tank B.
For special applications utilizing “2DRAIN”, contact the factory. Refer to System Programming.
Auxiliary
No Reverse
Auxiliary is pressed to activate the buzzer or other auxiliary output. NOTE: Auxiliary 4 is used to
activate a special fill to water level using a special output. Contact the manufacturer for details. (For
special applications only).
No Reverse is used to rotate the basket in one direction only during a step and should be pressed just
before pressing the Enter key.
Enter Enter is pressed to enter programming information into the computer’s memory.
Programming Keypad (Continued)
Red Keys Description