Bosch TAS5542 Máquina multibebida TASSIMO T55 EAN 4242002648316 - Manual (Page 11)

9
12/2011
en
Controls and Displays
(see the illustration at the beginning of this
instruction manual)
ON / OFF switch (1)
The ON / OFF switch is the main power
switch for the machine. You use it to turn
on your TASSIMO machine or turn it off
completely.
i Note:
To save even more energy, the appliance
should be switched off after each use.
Start / Stop button (2)
The Start / Stop button is used to start
and interrupt the brewing, cleaning and
descaling processes.
Drink adjustment buttons
+ (2a) and - (2b)
The drink adjustment buttons are for
adjusting the size of the drink you are
preparing:
2a Makes a larger / longer drink
(milder lavor)
2b Makes a smaller / shorter drink
(stronger lavor)
+
LED (3a) and
−
LED (3b)
These LEDs light up when the T DISC has
been detected. The
+
and
−
LEDs light up
individually according to whether a bigger
or smaller drink has been selected and
lash during the brewing process.
Status LED F (3c)
The Status LED indicates four machine
conditions:
– Steady orange:
Machine is in standby mode
– Blinking orange:
Machine is in the process of brewing a
drink / cleaning / descaling
– Steady red:
Error mode (for example, if the barcode
was not recognized)
– Dimmed, orange light:
Power-save mode
¡
CAuTION
Wait until the Status LED F (3c) has
stopped blinking before attempting to
open the brewing unit.
Fill water tank T (3d)
This indicator lights up when the removable
water tank needs to be reilled or is not in
place.
Descale required Q (3e)
This indicator lights up or blinks when your
TASSIMO machine needs to be descaled.
i Note:
Always descale your TASSIMO machine in
accordance with the instructions provided
under “Descaling” on page 15.
MAVEA ilter cartridge replacement
indicator (3f)
This indicator reminds you that it is time
to replace the MAVEA MAXTRA ilter
cartridge (5d).
TAS55_UC.indb 9 16.12.2011 13:45:09