Bosch TAS5542 Máquina multibebida TASSIMO T55 EAN 4242002648316 - Manual (Page 14)

12
Bosch Home Appliances
en
6. When the brewing process is complete,
the Status LED F (3c) stops blinking.
The brewing unit can be opened at this
point. Your beverage is now ready. You
can sit back and enjoy it or prepare
another beverage.
i Note:
There may be short pauses during the
brewing process. This is to achieve the
optimal lavor extraction.
If you don’t prepare any other beverages,
your machine automatically switches to
power-save mode.
To save even more electricity, we recom-
mend turning your TASSIMO machine off
with the ON / OFF switch (1) after each use.
Where to buy T DISCs
Your TASSIMO appliance works only with
specially developed capsules known as
TASSIMO T DISCs.
You can buy these T DISCs at various
retailers, or online at www.tassimo.com.
T DISC storage
T DISCs may be stored in their own pack-
aging or in other containers of your choice.
They should be stored in a cool, dry place.
Do not store your T DISCs in the refrigera-
tor or freezer. Provided the outer packaging
is intact, T DISCs may be used until the
best-before date which is printed on the
outer package.
Once outer foil packaging is removed, use
T DISCs within 6 weeks.
The machine is now ready to brew your
beverage.
¡
CAuTION
To avoid risk of scalding:
– Always wait until the Status LED F
(3c) has stopped blinking before at-
tempting to open the brewing unit.
– Do not open the brewing unit during
the brewing process.
– The brewing unit locks automatically
for beverages with a higher brewing
pressure.
– Do not touch the piercing unit
immediately after brewing.
– Please note that the beverages are
very hot when dispensed.
– T DISC is hot after brewing, please
handle with care.
4. To brew your beverage with the
recommended settings as deined in the
T DISC bar code, go straight to Step 5.
► You have the option to adjust the
beverage quantity to your taste with
the drink adjustment buttons:
drink adjustment button + (2a):
larger / longer drink for a milder lavor
drink adjustment button - (2b):
smaller / shorter drink for a stronger
lavor
► If the drink adjustment was chosen,
either the
+
or
−
LED will light up until
you start the brewing process.
5. Press the Start / Stop button (2) once to
start the brewing process.
► The Status LED F (3c) and (if selected)
the
+
or
−
LED blinks while the
machine is brewing.
►
If you want a larger beverage, you
can add more water immediately after
the brewing process by pressing and
holding the Start / Stop button (2) or the
drink adjustment button + (2a).
TAS55_UC.indb 12 16.12.2011 13:45:10