Aastra Telecom 6753i R - Manual (Page 42)

42 AastraLink RP System Administrator Guide
Advanced Admi
nistrator Options
A custom feed plays on a continuous cycle, without a definite beginning or ending.
When you park a call, the caller will hear the audio file from where it is currently
playing, not from where the audio file begins. Therefore, callers waiting in park hear
the same thing at the same time.
Using the default built-in Parked Call Music audio file
To configure the built-in audio file to play while a call is parked, do the following.
1. Click the Base Unit button.
2. Click Configure Park Music under the heading Properties.
3. Click Play the default music and click OK to complete the configuration.
Using an external music source for Parked Call Music
To configure external music to play while a call is parked, do the following.
1. Use an appropriate cable to connect your radio, CD player, or other sound device
to the analog jack marked with a microphone on the base unit.
2. Click the Base Unit button.
3. Click Configure Park Music under the heading Properties.
4. Click Play input connected to the audio jack on the base unit.
5. In the Input list, select Mono or Stereo, depending on the sound device you're
using. (Radios are usually mono; CD players are usually stereo.)
6. In the Volume list, adjust the setting to the appropriate level.
Note: To prevent distortion and improve the signal-to-noise ratio of the incoming
audio, adjust the volume on the analog audio source to a medium setting.
7. Click OK to complete the configuration.