SAF Tehnika CFIP PhoeniX and PhoeniX M ETSI V1.3 - Manual (Page 2)

© SAF Tehnika JSC
Ver. 1.3, 2012 March
CFIP PhoeniX series
Hybrid split mount system
Management features
Management port Ethernet with VLAN support or serial (RS-232)
Monitoring via Telnet, WEB GUI, NMS, SNMP Manager, Serial interface
SNMP Yes, SNMP traps, MIB, SNMP v1/v2c
EMS Web based, HTTP
ATPC feature Yes
ACM feature Hitless 0ms
Ethernet
Switch type Managed Gigabit Ethernet Layer 2
Max frame size 9728 bytes
MAC table 4K entries; automatic learning and aging
Packet buffer 128KB; non-blocking store&forward
Flow Control 802.3x
VLAN support 802.1Q (up to 4K VLAN entries)
QinQ (Double Tagging) Yes
QoS
64 level DiffServ (DSCP) or 8 level 802.1p mapped in 4
prioritization queues with VLAN support
QoS queuing Fixed or weighted (configurable ratio)
Spanning Tree Protocol
802.1D-2004 RSTP
802.1Q-2005 MSTP
Mechanical & Electrical
Temperature Range / Humidity -5°C to +55°C / 5% to 95%
Dimensions: HxWxD, mm / weight, kg 1U (45x430x240) / 3.1
Max. power consumption 20-30W
IDU-ODU connection
Belden 9914/RG-8 cable (300 m), RG213 cable (200 m),
N-Type connectors
DC port -40.5V to -57V DC (conforms to ETSI EN 300 132-2)
Built-in DC and IF port surge protection Conforms to ETSI EN 301 489-1; EN 61000-4-5; IEC 61000-4-5