Cfip phoenix m idu technical specification – SAF Tehnika CFIP PhoeniX and PhoeniX M ETSI V1.3 User Manual
Page 3
© SAF Tehnika JSC
Ver. 1.3, 2012 March
CFIP PhoeniX series
Hybrid split mount system
CFIP PhoeniX M IDU Technical Specification
Data modules
Expanded Base
- 14 x E1, high-density Molex connector
- 2 x E1, RJ-48C connector
- Voice, Data ORW RJ-48C connectors
- 100BaseTX, 1-100 Mbps, two RJ-45 ports
42E1 Base
- 42 x E1, 3x high-density Molex connector
- Voice, Data ORW RJ-48C connectors
- 100BaseTX, 1-100 Mbps, two RJ-45 ports
GigE Base
- 4x10/100/1000Base-T ports with RJ-45 connector
- Ethernet SFP connector
- 2 x E1, RJ-48C connector
- Voice, Data ORW RJ-48C connectors
Optional modules
16E1 Expansion module
- 14 x E1, high-density Molex connector
- 2 x E1, RJ-48C connector
21E1 Expansion module
- 21 x E1, 2x high-density Molex connector
STM-1 Optical mini module
STM-1, Single mode 1310 nm, SC Duplex Transceiver, Unconditionally eyesafe
laser IEC 825/CDRH Class 1 Compliant
STM-1 Electrical mini module
STM-1, 2xBNC, ITU-T Rec. G.703, 75Ohm
Unified Modem
Modulation
QPSK, 16QAM, 32QAM, 128QAM, 256QAM
Channel bandwidth
7 – 56 MHz
Capacity
up to 348 Mbps
Configurations
- 1+0, 1+1 (HSB/SD/FD)
- East-West repeater within single unit
- Ethernet Ring/Mesh (with RSTP)
- E1 ring protection
- STM-1 ADM (up to 63E1 per STM-1)
- 2+0, 3+0, 4+0 (Ethernet aggregation)
ACM
Yes
Connectors
TNC (Female) and RJ45 (for XPIC)
Intermediate Freq. Range
Tx carrier: 350 MHz, Rx carrier: 140 MHz
IDU-ODU cable
300m
Emissions mask
ETC 300 234, ETSI EN 301 216, FCC Part 101.111
FEC
concatenated Reed-Solomon Coding with Trellis Coded Modulation, or Convolutional
code
Gigabit Ethernet
Switch type
Managed Gigabit Ethernet Layer 2
Max frame size
9728 bytes
MAC table
4K entries; automatic learning and aging
Flow Control
802.3x
VLAN support
802.1Q (up to 4K VLAN entries)
QinQ (Double Tagging)
Yes
QoS
Port priority, 802.1Q VLAN Tag Priority, IPv4 TOS priority, DiffServ (DSCP)
priority
Spanning Tree Protocol
802.1D-2004 RSTP