Bosch KSV36BW30 Frigorifero monoporta Bianco - Manual (Page 24)

en
24
Switching
the appliance on
Switch on the appliance with the On/Off
button, Fig. 1/8.
The temperature display, Fig. 2/1,
indicates the selected temperature.
The appliance starts to cool, the light is
switched on when the door is open.
After the appliance has been switched
on, it may take several hours until the set
temperature has been reached. Do not
put any food in the appliance
beforehand.
Operating tips
■ While the refrigeration unit is running,
water droplets or a thin layer of ice
may form at the rear panel of
the refrigerator. This is nothing
unusual. It is not necessary to scrape
off the frost or wipe off the water
droplets. The rear panel defrosts
automatically. The condensation
collects in the condensation channel
and is carried to the refrigeration unit
where it evaporates.
■ If the air humidity is high,
condensation may form
in the refrigerator compartment,
especially on the glass shelves. If this
is the case, pack or wrap the food
and select a lower temperature
in the refrigerator compartment.
Setting
the temperature
Fig. 2
Refrigerator compartment
The temperature can be set from +2 °C
to +8 °C.
Keep pressing temperature setting
button 5 until the required refrigerator
compartment temperature is set.
The value last selected is saved. The set
temperature is indicated on temperature
display 1.
Energy saving mode
When the appliance is not used,
the display on the controls switches
to energy saving mode.
■ Energy saving mode display, Fig. 2/
4, illuminates.
■ The luminosity of the temperature
displays is reduced.
■
When the “Super” function is switched
on, the corresponding super display is
lit (Super cooling display, Fig. 2/2).
As soon as you operate the appliance,
e.g. open door or press any button,
the display switches to normal
illumination.