Bosch KSV36BW30 Frigorifero monoporta Bianco - Manual (Page 31)

en
31
Appliance self-test
Your appliance features an automatic
self-test program which shows you
sources of faults which may be repaired
by customer service only.
Starting the appliance self-test
1. Switch off the appliance and wait
5 minutes.
2. Switch on the appliance and within the
first 10 seconds hold down the super
button, Fig. 2/6 for 5-10 seconds
until the second warning signal
sounds.
The self-test programme starts.
When the self-test ends and a warning
signal sounds twice, your appliance is in
working order.
If the alarm display 2/3 flashes and
5 acoustic signals sound, there is a fault.
Inform customer service.
Ending the appliance self-test
When the programme has ended, the
appliance switches over to normal
operation.
Customer service
Your local customer service
can be found in the telephone directory
or in the customer-service index. Please
provide customer service
with the appliance product number
(E-Nr.) and production number (FD).
These specifications
can be found on the rating plate. Fig. 0
To prevent unnecessary call-outs, please
assist customer service by quoting
the product and production numbers.
This will save you additional costs.
Repair order and advice
on faults
Contact information for all countries can
be found on the enclosed customer
service list.
Fault Possible cause Remedial action
Appliance is not cooling,
temperature display and light
are lit.
Showroom mode is
switched on.
Hold down alarm button, Fig 2/7, for
10 seconds until an acknowledgement signal
sounds.
After a short time check whether your
appliance is cooling.
GB 0844 892 8979 Calls from a BT
landline will be
charged at up to
3 pence per
minute. A call set-
up fee of up to
6 pence may apply.
IE 01450 2655
US 800 944 2904 toll-free