ARRI Projection HDTV - Manual (Page 19)

19
• ‘Select sequence’:
The file browser opens and the sequence can be
selected in the display. This change will also be
returned to the ALGUI, if ALICE is left with saving.
• ‘Save configuration as…’
will open the file menu. The actual image processing
configuration can be saved without leaving ALICE.
• ‘Save job as…’ will save the actual job (including all
settings from the ALGUI) without leaving ALICE. You
will first be asked to save the image processing
configuration file for that new job and then be
prompted to save the job.
• ‘Save view as…’
is used to save the current view as a
- JPEG-image (8bit uncompressed or compressed)
with overlays, if activated or a
- TIFF-image (8 or 16 bit) without overlays.
Overlays are the ‘projector mask’ and the ‘save title
area’.
Note : JPEG image saves the view as displayed, with
a size according to the present magnification
factor.
TIFF images are always saved in the true image
size, regardless of the magnification factor.
They also preserve the internal data range
used, so images with bit depth less than 16
will appear dim as TIFF files.
• Choose ‘Exit and save configuration’
or close the ALICE window with the X
to save the image processing configuration file and
exit ALICE.
The File Menu
3.