ATEN ACS-1208L - Manual (Page 8)

Introduction
ACS-1208L / ACS1216L Front View
1. Handle
Pull to slide the KVM module out; push to slide the module in.
2. Cover
After sliding the KVM module out, flip up the cover to access the LCD
monitor, keyboard and trackball.
3. Port LEDs
Port LEDs provide status information about their corresponding CPU Ports.
The top row of LEDs corresponds to Ports 1 - 8; the bottom row corresponds
to Ports 9 - 16. There are two LEDs for each Port. The one on the left is the
On Line LED; the one on the right is the Selected Port LED:
w An On Line LEDs light ORANGE to indicate that the computer attached to
the corresponding port is up and running.
w A Selected LEDs light GREEN to indicate that the computer attached to
the corresponding port is the one that has the KVM focus. The LED is
steady under normal conditions, but flashes when its port is accessed
under Auto Scan Mode (see F7 SCAN, p. 26).
Note: 1. Since the ACS-1208L only has eight ports, only the top row of
LEDs (corresponding to Ports 1 - 8) are active on that unit. On the
ACS-1216L, both rows are active.
2. When the ACS-1208L / ACS-1216L is first powered on, the On Line
and Selected LEDs blink one after the other as the Switch performs
a self-test.
1
2
3
5
6
4
2002-01-15
4 ACS-1208L / ACS-1216L User Manual