Alpine CDA-118M - Manual (Page 34)

32
-EN
• When the “Scroll Setting (TEXT SCROLL)” (page 26) is set to
“AUTO”, the channel name and song title scrolls continuously. When
the Scroll Setting is set to “MANUAL”, the song title scrolls only
once.
• Depending on the model, the display may differ from the one shown
above.
Setting the Auxiliary Data Field Display
(XM only)
The XM Auxiliary Data Field (ADF) display can be switched on or off.
There is no ADF function for the SIRIUS receiver.
1
Press and hold FUNC./SETUP for at least 2
seconds to activate the SETUP selection mode.
2
Turn the Rotary encoder to select the XM mode,
and then press
/ENTER.
BT * 1 AUDIO GENERAL DISPLAY IPOD
XM/SIRIUS *
2 HD RADIO *
3 BT
*
1
Displayed only when INT MUTE is set to OFF, and the mode is set to
other than BT AUDIO.
*
2
Only when SAT Radio receiver is connected.
*
3
Only when HD Radio tuner module is connected.
3
Press /ENTER to activate the XM ADF mode.
4
Turn the Rotary encoder to select XM ADF ON/
OFF, and then press
/ENTER.
When setting to ON, Auxiliary Data Field is displayed by
pressing VIEW (refer to “Changing the Display” on
page 31).
5
Press and hold SETUP for at least 2 seconds to
return to normal mode.
• Pressing returns to the previous SETUP mode.
• If no operation is performed for 60 seconds, SETUP is canceled.
Alpine introduces IMPRINT - the world’s first technology that
thoroughly eliminates in-boat acoustic problems that normally degrade
sound quality, which enables us to experience music the way the artist
intended.
When the IMPRINT audio processor (PXA-H100) (sold separately) is
connected to this unit, MultEQ and the following sound adjustment can
be performed.
Changing MultEQ mode
MultEQ, developed by Audyssey Labs, automatically corrects the audio
for the listening environment. The system is optimized for selected
positions in the boat. To accomplish this, MultEQ must take
measurements of the boat’s response characteristics. For details on the
set up procedure, consult your authorized Alpine dealer.
1
Press and hold AUDIO for at least 2 seconds.
2
Press /ENTER.
3
Turn the Rotary encoder to select the MultEQ
mode, and then press
/ENTER.
OFF (Manual Mode) CURVE1 (MultEQ-1)
CURVE2 (MultEQ-2) OFF (Manual Mode)
4
Press and hold AUDIO for at least 2 seconds to
return to normal mode.
• The Curve mode can be selected only when curve 1 and curve 2 are
stored.
• When using MultEQ, MX, X-OVER, Time Correction, Factory’s EQ,
SUBW PHASE, SUBW CHANNEL, TW Setup, EQ Mode, Filter Type,
Parametric EQ and Graphic EQ are set automatically. They are no
longer user adjustable.
• When an external audio processor is connected, the MultEQ function
cannot be used.
IMPRINT Operation
(Optional)
AUDIO
Rotary encoder
/ENTER
FUNC./SETUP