Hauler Racks Universal Steel Econo Truck Rack (STE2-1) User Manual
Page 4
Advertising
4 of 8
HAULER RACKS, INC.
7109 31
st
Avenue North
Minneapolis, MN 55427-2848
WWW.HAULERRACKS.COM
Toll Free: 1-800-843-5445
Phone: 763-546-5620
Fax: 763-546-0933
Step 3 Leg placement on bed
Drill out the three marked holes marked on the tape with a 3/8” drill and remove tape from the truck bed.
Use silicone and apply a bead around each bolt hole.
Place the load plate down first and then position the leg over the plate and align the bolt holes.
Secure the leg and load plate to the bed with (3) bolts, (3) Flat washers, (3) split lock washers and (3) nuts.
NOTE: The flat washer go on the top surface and split lock washer mount underneath the bed rail.
Repeat for other legs.
Advertising