Hauler Racks Universal Steel Econo Truck Rack (STE2-1) User Manual
Page 7
7 of 8
HAULER RACKS, INC.
7109 31
st
Avenue North
Minneapolis, MN 55427-2848
WWW.HAULERRACKS.COM
Toll Free: 1-800-843-5445
Phone: 763-546-5620
Fax: 763-546-0933
Step 5 (continued) Crossbar to leg assembly
Orientate the 2” tube as shown (note the holes are not centered on this end of the crossbar)
Starting with the bottom hole first, insert the 3/8”-16 x 5” bolt with a flat washer through the leg and 2” square
crossbar.
Secure the bolt with a flat washer and 3/8”-16 nylon insert lock nut.
Repeat for other bolt hole.
Insert the 2” square end cap into the top of the leg.
Lightly tighten the hardware.
Check to make sure the crossbar is square to the upper portion of the legs. Adjust as needed and then tighten the
hardware.
Repeat for other crossbar.
Go around rack and check all hardware making sure it is tight.