Actiontec electronic Wireless Digital Media Player DMP011000-01 - Manual (Page 10)

7
Setting Up the Player
The instructions that follow parallel the steps contained in the Actiontec Installation
Buddy
® Buddy Buddy , which provides a visual guide to setting up the Player. It is recommended the
user run the Installation Buddy first, before attempting any other procedures.
To use the Player, it must be connected to a television and/or stereo, the wireless
connection must be set up, the Actiontec Media Buddy must be installed, and the
computer must be set up to find the media files.
Connecting the Player to a Television/Stereo
The first step in using the Digital Media Player is connecting it to a television and/
or stereo.
1. Remove the Wireless Digital Media Player from its box and place near or on
top of the television.
2. Remove the Power Cord from its white box. Power Cord Power Cord
2