Actiontec electronic Wireless Digital Media Player DMP011000-01 - Manual (Page 5)

2
Actiontec Wireless Digital Media Player User Manual
Player Features
The Player has a series of informational LED s (lights) on its front panel, and a
variety of ports on its rear panel. It is recommended that the user become familiar
with these features before installing or setting up the Player.
Front Panel
There are 3 LEDs (light emitting diodes) on the front panel of the Player, as shown
in the figure, below.
Power
10/100 Link
/Act
WIRELES
S
LINK
LINK
Power
The Power LED illuminates when power is supplied to the Player.
10/100
The 10/100 LED illuminates when the Player is connected to a computer via an
Ethernet cable.
Link/Act
The Link/Act LED iluminates when the Player is connected via Ethernet cable to
a computer. The LED flickers when the connection is active (i.e., data is passing
from the computer to the Player).