Actiontec electronic Wireless Digital Media Player DMP011000-01 - Manual (Page 7)

4 4
Action Actiontec Wireless Digital Media Player User Manual tec Wireless Digital Media Player User Manual
S/P Dif, Optical Ports
The S/P Dif (Sony/Philips Digital Interface) port is used to connect the Player to
a compatible S/P Dif audio receiver. The S/P Dif uses an RCA cable to connect,
while the Optical port uses an optical cable.
Ethernet Port
The Ethernet port is used to connect the Player to a computer or hub/router
using a crossover Ethernet cable. A crossover Ethernet cable must be used to
connect the Player to a computer. A standard, straight-through Ethernet cable
will not connect the Player to a computer.
Power Port
The Power port is used to connect the Player to a standard electrical outlet using
the included Power cord.
Side Panel
On the left side panel of the Player (when viewing from the front) includes a PC
Card slot, which is used to connect the wireless PC Card included with the Digital
Media Player kit. To install the card, see chapter 2, “Setting up the Player.”