Ransburg Vector R Series Classic 79520 R90 Waterborne - Manual (Page 47)

Vector R Series Classic Applicators - Maintenance
43
Ransburg
AH-06-02.12
Figure 27: Hook Insertion Into Handle
4. Push the hook gasket into the groove of the
hook. Apply a light coat of dielectric grease
(LSCH0009) to the hook gasket exterior and slide
the hook into position.
5. Reinstall the air valve components in the reverse
order of disassembly.
6. Push the rear cover onto the back of the handle.
Secure the cover by inserting the fan air adjustment
valve into the handle and tighten in the clockwise
direction.
7. Insert the barrel gasket back into the handle.
NOTES