Reese 30845 25K ELITE SERIES GOOSENECK - Manual (Page 11)

30845IN – 31OCT12D PCN18116 ©2005, 2012 CEQUENT PERFORMANCE PRODUCTS, INC. Litho in USA 11
For Kits 30845, 40845 & 50845
Signature Series Gooseneck Removal:
1. Remove lynch pin / lock from the anchor handle holes on each side of the Signature Series Gooseneck hitch. Figure 14.
Store lynch pins.
2. Rotate (4) handles into unlocked position(perpendicular with Signature Series Gooseneck Hitch). Figure 14. Lift each side
of hitch out of pucks separately, handles may have to be jiggled slightly to align anchors with puck holes to remove.
See Figure 18.
3. Store hitch in dry place where dirt and debris will not get into anchor assemblies.
4. Press puck plugs (packed with mounting kit) into all (4) of the pucks in the truck bed to keep debris out of pucks.
Figure 17.
Signature Series Gooseneck Installation:
1. Remove puck plugs from all (4) of the pucks in the truck bed (Figure 17) and store for use when hitch is removed.
2. Set
Signature Series Gooseneck hitch onto the pucks, and rotate handles into unlocked position(approximately
perpendicular with Signature Series Gooseneck Hitch Figure 14) until hitch drops into pucks on all (4) corners. See Figure
18.
3. Rotate (4) anchor handles into the locked position(anchor handles parallel with gooseneck). Figure 14.
4. Place lynch pins / locks through the anchor handle holes on each side to anchor hitch into pucks. Figure 14.
Fig. 17
Truck Bed
Puck Plug
Puck
Fig. 18