Signature series – Reese 30845 25K ELITE SERIES GOOSENECK User Manual
Page 12
30845IN
– 31OCT12D PCN18116 ©2005, 2012 CEQUENT PERFORMANCE PRODUCTS, INC. Litho in USA
12
For Kits 30845, 40845 & 50845
AFTER SYSTEM INSTALLATION AND BEFORE TOWING:
Connect trailer to the tow vehicle following coupler manufacturer’s operating instructions.
The coupler must be adjusted to provide about 6
” of clearance between the bottom of the trailer nose and the top
of the pickup bed sides.
Slowly back the trailer to a jackknifed position to the tow vehicle while checking to see there is adequate
clearance between the gooseneck trailer and the rear of the vehicle. Also check to see there is adequate
clearance between the forward corners of the gooseneck trailer and the cab of the truck. Slowly jackknife the
truck and trailer in the opposite direction and check the clearances to the end of the truck and the cab.
Signature Series
GOOSENECK MAINTENANCE
-Keep assembly free of dirt and debris.
-Lubricate hitch ball monthly or as needed with heavy grease.
-Check equipment before towing for worn or damaged parts.
REPLACE WORN OR DAMAGED PARTS IMMEDIATELY.
Lubricate hitch ball monthly
or as needed.
Chain Loops for safety chains
WARNING:
To prevent serious damage to
truck and/or persons both Lynch
Pins Must be installed through
the holes in the Anchor Handles
for the hitch to be properly
locked.
Install Lynch Pin through
holes in Anchor Handles to lock